02.jpg

CHETRA Coolants / Cutting Agents, Industrial Cleaner and Special Lubricants

This website utilizes cookies. By using this website and its features and information you accept these cookies. For more information regarding the use of cookies and regarding our data privacy statement please klick here: Data Privacy

Coolants / Cutting Agents, Industrial Cleaner and Special Lubricants

 

Product Overview

  CHETRA descaler > Link for the environmentally friendly descaling of industrial water systems
  CHETRATHENE
high-performance cleaner
> Link for metallic and non-metallic surfaces
 

DE•LU cleansing lubricating oil

> Link special oil stable against aging, with performance additives for all machine and instrument parts
  I•M•S industrial cleaner > Link environmentally friendly multi-purpose cleaner for the industry
  MC IV high pressure cleaner > Link MC IV can be used in immersion baths, in ultrasonic baths as well as in spray booths
  SKM synthetic cooling lubricant > Link synthetic cooling lubricant for cooling and lubrication of metal working
  SKM 10 synthetic grinding coolant > Link fully synthetic, water soluble, mineral oil free and low foam grinding concentrate
  SKM 40 semi-synthetic cooling lubricant > Link semi-synthetic universal cooling lubricant
  SR I system cleaner > Link mineral oil free, water soluble cleaner system
  TA•CO thread cutting and coolant > Link double acting special product for threading, drilling, milling, turning, etc. for all metals
   
   

CHETRA descaler

 

CHETRA ® descaler is specially designed for the environmentally friendly descaling of industrial water systems. The descaler, mixed with corrosion inhibitors and based on organic and inorganic acids is characterized by its excellent limescale removing power, while providing excellent material compatibility with ferrous materials and non-ferrous metals the same time.

CHETRA ® descaler dissolves lime deposits in water systems and all acid-resistant surfaces.

Depending on the degree of calcification CHETRA ® descaler should be used at a concentration of 10 - 25%. Best results are obtained in the temperature range between 40°C - 80°C.

When handling the product, the information and advice given in the safety data sheet must be followed.
 

**** Gebinde ****
Prod. No. 900670 20 l Container
Prod. No. 900671 1000 l IBC
 
 
    ↑↑↑
   
   

CHETRATHENE high-performance cleaner

 

For metallic and non-metallic surfaces.

Cleans in seconds residues of grease, oil, silicone residues, dirt, wax and adhesives.
It is also suitable for cleaning of brakes, clutches, molds, flanges and the same.
CHETRATHENE® evaporates without residue; (beware of plastics that can be dissolved)

CHETRATHENE® is available as aerosol, to be used for hard to reach areas, as well as in containers for immersion applications.

CHETRATHENE® is a quickly effective, with high cleaning efficiency functioning cold cleaner.

solvent-based product

 

CHETRATHENE high-performance cleaner

  • free of contaminants such as PCBs, lead, cadmium and other harmful substances

  • contains no carcinogenic hazardous substances according to EC directives

  • for degreasing and activation of parts prior to bonding

  • replaced PER and CHC-based cleaners

CHETRATHENE® to be sprayed on to be cleaned parts, leave on short and wash it off with a lint-free cloth.
Check plastic and paint compatibility by preliminary safe test.
 
**** Gebinde ****
Prod. No. 900001 500 ml Aerosol
Prod. No. 900002 20 l Container
 
 
    ↑↑↑
   
   

DE•LU cleansing lubricating oil

 

DE•LU is a special oil stable against aging, with high-performance additives for all machine and instrument parts.
Highly durable lubricating film, which is characterized by its particular suitability in precision engineering and also to be used as a light oil lubricant for electric motors and other dynamic, moving machinery and plant parts.
DE•LU is also suitable as a lubricant such as pneumatic oilers.

 

DE•LU cleansing lubricating oil

  • does not bond nor becomes resin like (special suitability in precision engineering)

  • chemically stable

  • protects against corrosion

  • excellent penetration

  • silicone-free

  • low-friction and wear-reducing

Cleansing lubricating oil for normal temperature ranges.

Instructions of machine manufacturer must be followed.
 

**** Gebinde ****
Prod. No. 900660 400 ml Aerosol
Prod. No. 900663 20 l Container
Prod. No. 900664 200 l Drum
 
 
    ↑↑↑
   
   

I•M•S industrial cleaner

 

I•M•S is an environmentally friendly multi-purpose cleaner for the industry, water-based, highly concentrated, effective until 1:50 dilution (for heavy dirt correspondingly higher dose). Typical dilution of 1:25.
For cleaning of common contaminants such as oil, grease, wax, mildew, soot deposits on machine parts, tools, hoods, sheets, walls, floors.
Removes successfully cutting and coolant residues. Also suitable for use in the food and automotive industry as well as household and hobby.

I•M•S is an extremely versatile cleaner that is suitable for cleaning for both metals as well as plastics, textile, acrylic glass, glass and rubber parts etc. (mind the degree of dilution).


I•M•S industrial cleaner

  • biodegradable

  • water based product

  • chlorine free

  • low phosphate

  • free from toxic and water polluting solvents

**** Gebinde ****
Prod. No. 900106 20 l Container
Prod. No. 900100 200 l Drum
 
 
    ↑↑↑
   
   

MC IV high pressure cleaner

 

MC IV can be used in immersion baths, in ultrasonic baths as well as in spray booths.

CHETRA MC IV is a liquid, alkaline, water soluble cleaning concentrate based anionic and nonionic surfactants and wetting agents, as well as complex agents, amines and cleaning amplifier.

The dilutions of the concentrate are used to remove grease and oily soils from hard surfaces. The dissolved amounts of oil are not emulsified, but differ from at rest position of the bath on the surface and can be skimmed off.

Solubility: miscible in any proportions with water.
 

Concentration     dip immersion  1:5  up to  1:10
      ultrasonic bath  1:10  up to  1:20
      spraying equipment  1:20  up to  1:50


The product is biodegradable over 95%.

 
**** Gebinde ****
Prod. No. 900718 25 l Container
Prod. No. 900720 200 l Drum
 
 
    ↑↑↑
   
   

SKM synthetic cooling lubricant

 

SKM synthetic cooling lubricant for cooling and lubrication of metal working.

When turning, milling, grinding, drilling, sawing, forming, rolling, etc. from virtually all metals and cast iron (other than magnesium, caution with aluminum due to discoloration). High quality transparent product, rot-resistant, water soluble, economical concentrate, with organic corrosion inhibitors and EP additives.

Due to usage of SKM, reduction of heat generation, lower cutting forces, faster heat dissipation, thereby improving life time of tools and better dimensional stability.

SKM according to the standards and provisions of TRGS 611.

While stored avoid large temperature fluctuations and frost. Before using SKM must be brought to room temperature

 

SKM synthetic cooling lubricant

  • non flammable

  • mineral oil free

  • water based product

  • recommended concentration of use 4-6%
    (in non-cutting metal forming applications up to 10%), depending on the shaping parameters)

**** Vor der Befüllung mit CHETRA SKM ist das System mit CHETRA SR I Systemreiniger zu reinigen. ****

 
**** Gebinde ****
Prod. No. 900672 20 l Container
Prod. No. 900673 200 l Drum
 
 
    ↑↑↑
   
   

SKM 10 synthetic grinding coolant

 

SKM 10 is a fully synthetic, water soluble, mineral oil free and low foam grinding concentrate. The transparent solution provides a clear view on the machine and workpiece.
SKM 10 does not develop any unpleasant odors, is free of chlorine, sulfur, and sodium nitrite.
Its high resistance against microbial attack prolongs the service life considerably; not sticky and prevents corrosion.

SKM 10 is particularly suitable for high performance grinding for most commercial metals, also for the processing of hard to be ground metals and alloys.

Suitable for all metal processing methods.

 

SKM 10 synthetic grinding coolant

  • extremely low foaming in soft water

  • extremely low foaming in soft water

  • not toxic

  • metals inhibited, corresponds TGRS 611

  • concentration depending on the application from 2.5% up to 4%

  • skin compatibility dermatologically tested

**** Vor der Befüllung mit CHETRA SKM 10 ist das System mit CHETRA SR I Systemreiniger zu reinigen. ****

 
**** Gebinde ****
Prod. No. 900694 20 l Container
Prod. No. 900693 200 l Drum
 
 
    ↑↑↑
   
   

SKM 40 semi-synthetic cooling lubricant

 

SKM 40 is a semi-synthetic universal cooling lubricant, extremely low foaming in soft water. Through translucent emulsion an unobstructed view on the machine and the workpiece is ensured. Does not smell and does not get sticky.

SCM 40 is free of PCB, formaldehyde, sulfur and sodium nitrite, and non-toxic. Thanks to a very high resistance to microbial attack a longer service life is ensured.

Excellent lubricity even at low concentration. SKM 40 prevents corrosion damage.

With SKM 40 excellent results are obtained by the processing of steel, stainless steel, cast iron, aluminum and aluminum alloys, process with all major metal processing methods. No leaching of copper ions.

SKM 40 corresponds to the standards and provisions of TRGS 611.

 

SKM 40 semi-synthetic cooling lubricant

  • resistant to fungal and bacterial attack

  • non-ferrous metal inhibited

  • concentration 4% - 6% (depending on application)

  • dermatologically tested

  • free of PCBs, sulfur and sodium nitrite

**** Vor der Befüllung mit CHETRA SKM 40 ist das System mit CHETRA SR I Systemreiniger zu reinigen. ****

 
**** Gebinde ****
Prod. No. 900691 20 l Container
Prod. No. 900690 200 l Drum
 
 
    ↑↑↑
   
   

SR I system cleaner

 

SR I is a mineral oil free, water soluble cleaner system. It contains anionic and nonionic surfactants, as well as microbicides with a broad spectrum and good dirt release and soil carrying capacity. System cleaner is effective against germs occurring in water mixed cooling lubricants.

SR I is mainly used in circuits which are filled with mineral oil based, water mixed cooling lubricants.

SR I is used, depending on the pollution of operating the emulsion at a concentration of 1-2%.

It should be at least 8 hours, preferably 24 hours, added before emulsion exchange.
In addition, it should be pumped during the working process together with the cooling lubricant circuit.

SR I is according to EEC a hazardous substance and labeled with Xi (irritant).

SR I should be suspended during storage either from large temperature fluctuations or frost. Bring to room temperature before use.
 

**** Gebinde ****
Prod. No. 900689 20 l Container
 
 
    ↑↑↑
   
   

TA•CO thread cutting and coolant

 

TA•CO is a double acting special product for threading, drilling, milling, turning, etc. for all metals (aluminum), also for high quality alloys.
A dual effect is caused by the rapidly volatilizing coolant which transfers heat friction, and the lubricant which facilitates movement between tool and material being worked.
Thus, the operation is speeded up without the otherwise occurring fracture risk due to overheating and "welding" in tools; the tool life is extended.

  • chlorine and phosphorus free

  • oil mist minimized

  • also suitable for molding of non ferrous and precious metals

  • very good high compressive strength

  • corrosion protection properties

  • excellent moisture ability and adhesion (by polar substances)

  • excellent flushing and cooling effect


Mineral oil base with additives (against wear, oxidation, corrosion protection)

TA•CO is not miscible with water
 

 

**** Gebinde ****
Prod. No. 900645 400 ml Aerosol
 
 
    ↑↑↑
Maintenance products:
» Corrosion Prevention, Lubricants and Anti-Seize
» Coolants / Cutting Agents, Industrial Cleaner and Special Lubricants
» Sealing Tapes, Joint Sealants/-Tapes, Liquid Sealing
» Application areas